WANG Lei, ZHANG Wei, ZHANG Jian-Cheng, WENG Jian-Jian, HE Shan 2014, 'Visual Inspection for Breakage of Micro-milling Cutter', Sensors & Transducershttp://www.sensorsportal.com/HTML/DIGEST/november_2014/Vol_182/P_2527.pdf. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)

Yung-Chih Lin, Kung-Da Wu, Wei-Cheng Shih, Jui-Pin Hung 2019, 'Evaluation of the Optimum Machining Stability of a Milling Tool with Different Flutesand Overhangs', Advances in Science and Technology Research Journalhttp://www.journalssystem.com/astrj/Evaluation-of-the-Optimum-Machining-Stability-of-a-Milling-Tool-with-Different-Flutes,106235,0,2.html. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)

Tao Chen, Fei Gao, Suyan Li, Xianli Liu 2018, 'The Comparative Study on Cutting Performance of Different-Structure Milling Cuttersin Machining CFRP', Applied Scienceshttp://www.mdpi.com/2076-3417/8/8/1353. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)

Stefan BERCZYŃSKI, Daniel GROCHAŁA, Zenon GRZĄDZIEL 2017, 'MODELING OF SURFACE GEOMETRIC STRUCTURE STATE AFTER INTEGRATEDFORMED MILLING AND FINISHBURNISHING', Management Systems in Production Engineeringhttp://wydawnictwo.panova.pl/attachments/article/548/mspe-2017-020.pdf. Retrieved from DOAJ CC BY 4.0 (https://creativecommons.org/licenses/by-sa/4.0/legalcode)