heat pump

n. A device that warms or cools a building by transferring heat from a relatively low-temperature reservoir to one at a higher temperature.

heat pump

n (Mechanical Engineering) a device, as used in a refrigerator, for extracting heat from a source and delivering it elsewhere at a much higher temperature

heat′ pump`

n. a device that uses a compressible refrigerant to transfer heat in a reversible process from one body, as the ground, air, or water, to another body, as a building. [1890–95]

Thesaurus

Noun

heat pump - apparatus that extracts heat from a liquid that is at a higher temperature than its surroundings; can be used to transfer heat from a reservoir outside in order to heat a buildingapparatus, setup - equipment designed to serve a specific function

heat pump

heat pump:

see air conditioningair conditioning,
mechanical process for controlling the humidity, temperature, cleanliness, and circulation of air in buildings and rooms. Indoor air is conditioned and regulated to maintain the temperature-humidity ratio that is most comfortable and healthful.
..... Click the link for more information. .

Heat pump

An electric device with both heating and cooling capabilities. It extracts heat from one medium at a lower (the heat source) temperature and transfers it to another at a higher temperature (the heat sink), thereby cooling the first and warming the second. Because they move heat rather than generate heat, heat pumps can significantly reduce energy costs. Air-source, ductless mini-split, geothermal, and absorption are some of the varieties of heat pumps used in homes.

Heat Pump

a device that transfers thermal energy from a lowtemperature heat source, most often the environment, to a high-temperature heat receiver. The operation of a heat pump requires the consumption of external mechanical, electrical, chemical, or other type of energy. The processes that occur in a heat pump are similar to those involving the working fluid of a refrigerator, except that refrigeration equipment is designed to generate cold, whereas a heat pump generates heat. Liquids with a low boiling point, such as Freon or ammonia, are the working fluids normally used in a heat pump.

The heat flowing into the receiver of a heat pump consists not only of a quantity equivalent to the external work performed but also heat from a heat source, such as river water. Consequently, the energy conversion factor for a heat pump is always greater than 1, and the conversion process is more favorable than the direct conversion of electrical, mechanical, or chemical energy into heat. However, the trend in power engineering toward joint production of heat and electric power limits the use of heat pumps to situations in which other forms of thermal energy cannot be readily supplied—for example, in locations far from district heat and power plants.

Heat pumps are sometimes used for heating buildings in regions with warm climates, since the same unit may be using during the summer to cool incoming air. Because of fuel shortages, heat pumps were widely used during World War II (1939–45), particularly in countries that had a surplus of cheap hydroelectric power, such as Switzerland, Sweden, and Norway.

V. S. BUNIN

heat pump

[′hēt ‚pəmp] (mechanical engineering) A device which transfers heat from a cooler reservoir to a hotter one, expending mechanical energy in the process, especially when the main purpose is to heat the hot reservoir rather than refrigerate the cold one.

Heat pump

The thermodynamic counterpart of the heat engine. A heat pump raises the temperature level of heat by means of work input. In its usual form a compressor takes refrigerant vapor from a low-pressure, low-temperature evaporator and delivers it at high pressure and temperature to a condenser (see illustration). The pump cycle is identical with the customary vapor-compression refrigeration system. See Refrigeration cycle

This dual purpose is accomplished, in effect, by placing the low-temperature evaporator in the conditioned space during the summer and the high-temperature condenser in the same space during the winter. Thus, if 70°F (21°C) is to be maintained in the conditioned space regardless of the season, this would be the theoretical temperature of the evaporating coil in summer and of the condensing coil in winter. The actual temperatures on the refrigerant side of these coils would need to be below 70°F in summer and above 70°F in winter to permit the necessary transfer of heat through the coil surfaces. If the average outside temperatures are 100°F (38°C) in summer and 40°F (40°C) in winter, the heat pump serves to raise or lower the temperature 30° (17°C) and to deliver the heat or cold as required.

The heat pump is also used for a wide assortment of industrial and process applications such as low-temperature heating, evaporation, concentration, and distillation.

heat pump

heat pump A device that transfers heat from a cooler reservoir to a hotter reservoir by means of a heat exchanger, requiring the expenditure of mechanical energy in the process; used in an air conditioner whose cooling cycle can be reversed so that it can function as a heater.

heat pump

heat pump

heat pump

heat′ pump`

heat pump

heat pump:

Heat pump

Heat Pump

heat pump

Heat pump

heat pump

heat pump

Words related to heat pump

noun apparatus that extracts heat from a liquid that is at a higher temperature than its surroundings

Related Words