Prime Coats

materials that form the undercoats of paint and varnish coverings. The principal purpose of the prime coats is to provide durable adhesion between the outer (covering) layers and the surface being painted. In addition, they may perform other functions, including the protection of metal from corrosion, the enhancing of wood grains, and the covering of pores and other defects of the surface being painted. Prime coats are made from natural or synthetic, liquid or solid film-forming substances—drying oils and al-kyd. urea-formaldehyde, and epoxy resins. The hard film-forming materials are used in the form of concentrated solutions and dispersions in organic solvents or water. Many prime coats contain pigments (iron oxide, red lead, or zinc chromate) and sometimes fillers (talc, mica, or chalk).

Prime coats are applied with a putty knife or by spraying. The thickness of prime coats is 10–100 microns (0.01-0. 1 mm). Dried prime-coated surface is covered by paint or lacquer.

REFERENCES

Beliaeva. K. P., T. V. Todorova, and N. G. Shtan’ko. Lakokra-sochnye materialy dlia otdelki izdelii iz dereva. Moscow, 1971.
Spravochnik po lakokrasochnym pokrytiiam, 2nd ed. Edited by M. M. Goldberg. Moscow. 1974.

单词	prime coats
释义	Prime Coats Prime Coats materials that form the undercoats of paint and varnish coverings. The principal purpose of the prime coats is to provide durable adhesion between the outer (covering) layers and the surface being painted. In addition, they may perform other functions, including the protection of metal from corrosion, the enhancing of wood grains, and the covering of pores and other defects of the surface being painted. Prime coats are made from natural or synthetic, liquid or solid film-forming substances—drying oils and al-kyd. urea-formaldehyde, and epoxy resins. The hard film-forming materials are used in the form of concentrated solutions and dispersions in organic solvents or water. Many prime coats contain pigments (iron oxide, red lead, or zinc chromate) and sometimes fillers (talc, mica, or chalk). Prime coats are applied with a putty knife or by spraying. The thickness of prime coats is 10–100 microns (0.01-0. 1 mm). Dried prime-coated surface is covered by paint or lacquer. REFERENCES Beliaeva. K. P., T. V. Todorova, and N. G. Shtan’ko. Lakokra-sochnye materialy dlia otdelki izdelii iz dereva. Moscow, 1971. Spravochnik po lakokrasochnym pokrytiiam, 2nd ed. Edited by M. M. Goldberg. Moscow. 1974.
随便看	greater tucson economic council greater tucson strategic partnership for economic development greater tulsa association of realtors greater tulsa hispanic chamber of commerce greater tulsa razorback club greater tunb greater twin cities blues music society greater twin cities golden retriever club greater twin cities tennis association greater twin cities whippet club greater twin cities youth symphonies greater tympanic spine greater ukiah localization project greater underwater propulsion power greater underwater propulsion power program greater union county association of realtors greater union village technology greater universal stores greater university chamber of commerce greater upper valley solid waste management district greater upstate law project greater valley forge human resources association greater valley forge transportation management association greater vancouver area greater vancouver community credit union