请输入您要查询的英文单词:

 

单词 water hammer
释义

water hammer


water hammer

n.1. A banging noise heard in a water pipe following an abrupt alteration of the flow with resultant pressure surges.2. A banging noise in steam pipes, caused by steam bubbles entering a cold pipe partially filled with water.

water hammer

n (General Physics) a sharp concussion produced when the flow of water in a pipe is suddenly blocked

wa′ter ham`mer


n. the concussion and accompanying noise that result when a volume of water moving in a pipe suddenly stops or loses momentum. [1795–1805]
Thesaurus
Noun1.water hammer - the banging sound of steam in pipesclap, bam, bang, blast, eruption - a sudden very loud noise

Water Hammer


Water hammer

The propagation in a liquid of an acoustic wave that is caused by a rapid change in fluid velocity. Such relatively sudden changes in the liquid velocity are due to events such as the operation of pumps or valves in pipelines, the collapse of vapor bubbles within the liquid, underwater explosions, or the impact of water following the rapid expulsion of air from a vent or a partially open valve. Alternative terms such as pressure transients, pressure surge, hydraulic transients, and hydraulic shock are often employed. Although the physics and mathematical characterization of water hammer and underwater acoustics (employed in sonar) are identical, underwater sound is always associated with very small pressure changes compared to the potential of moderate to very large pressure differences associated with water hammer. See Cavitation, Sound, Underwater sound

A pressure change Δp is always associated with the rapid velocity change ΔV across a water hammer wave, as formulated from the basic physics of mass and momentum conservation by the Joukowsky equation, Δp = -ρaΔV. Here &rgr; is the liquid mass density and a is the sonic velocity of the pressure wave in the fluid medium. In a pipe, this velocity depends on the ratio of the bulk modulus of the liquid to the elastic modulus of the pipe wall, and on the ratio of the inside diameter of the pipe to the wall thickness. In water in a very rigid pipe or in a tank, or even the sea, the acoustic velocity is approximately 1440 m/s (4720 ft/s), a value many times that of any liquid velocity.

Liquid-handling systems are designed so that water hammer does not result from sudden closure, but is limited to more gradual flow changes initiated by valves or other devices. The dramatic pressure rise (or drop) results can be significantly reduced by reflections of the original wave from pipe-area changes, tanks, reservoirs, and so forth. Although the Joukowsky equation applies across every wavelet, the effect of complete valve closure over a period of time greater than a minimum critical time can be quite beneficial. This critical time is the time required for an acoustic wave to propagate twice the distance along the pipe from the point of wave creation to the location of the first pipe-area change. See Hydrodynamics

Water Hammer

 

the phenomenon of a sharp change in pressure in a fluid caused by an instantaneous change in its flow velocity in a pressure pipe (for example, in case of rapid closing of the pipeline by a shutoff device).

The pressure rise in water hammer is defined according to the theory of N. E. Zhukovskii by the formula

Δp = ρ(v0 - vx)c

where Δp is the pressure rise in newtons per sq m, and ρ is the fluid density in kg/m3; v0 and vt are the mean velocities in the pipeline (in m/sec) before and after the closing of the slide valve, and c is the speed of propagation of the shock wave through the pipeline. If the walls are absolutely rigid, c = a, the velocity of sound in the fluid (in water, a= 1,400 m/sec). In tubes with elastic walls, Water Hammer, where D and δ are the diameter and thickness of the tube’s wall, and E and e are the elastic moduli of the material of the walls of the tube and of the liquid, respectively.

Water hammer is a complex process of formation of elastic deformations in a liquid and their propagation through a tube. If the pressure rise is very great, the impact can cause damage. Safety devices (equalizing reservoirs, air domes, valves, and so on) are installed in pipelines to prevent such damage.

The theory of water hammer, which was developed by N. E. Zhukovskii, promoted technological progress in hydraulic engineering, mechanical engineering, and other fields.

REFERENCES

Zhukovskii, N. E. O gidravlicheskom udare v vodoprovodnykh trubakh. Moscow-Leningrad, 1949.
Mostkov, M. A., and A. A. Bashkirova. Raschety gidravlicheskogoudara. Moscow-Leningrad, 1952.

V. V. LIASHEVICH

water hammer

[′wȯd·ər ‚ham·ər] (fluid mechanics) Pressure rise in a pipeline caused by a sudden change in the rate of flow or stoppage of flow in the line.

water hammer

1. In water lines, a loud thumping noise that results from a sudden stoppage of the flow. 2. In steam lines, water of condensation that is picked up and carried through the steam main at high velocity; when direction of the flow changes, the water particles hit the pipe walls, emitting a banging noise.

water hammer


  • noun

Words related to water hammer

noun the banging sound of steam in pipes

Related Words

  • clap
  • bam
  • bang
  • blast
  • eruption
随便看

 

英语词典包含2567994条英英释义在线翻译词条,基本涵盖了全部常用单词的英英翻译及用法,是英语学习的有利工具。

 

Copyright © 2004-2022 Newdu.com All Rights Reserved
更新时间:2024/12/22 20:32:53