coal liquefaction

coal liquefaction

[¦kōl lik·wə′fak·shən] (chemical engineering) The conversion of coal (with the exception of anthracite) to petroleum-like hydrocarbon liquids, which are used as refinery feedstocks for the manufacture of gasoline, heating oil, diesel fuel, jet fuel, turbine fuel, fuel oil, and petrochemicals.

Coal liquefaction

The conversion of most types of coal (with the exception of anthracite) primarily to petroleumlike hydrocarbon liquids which can be substituted for the standard liquid or solid fuels used to meet transportation, residential, commercial, and industrial fuel requirements. Coal liquids contain less sulfur, nitrogen, and ash, and are easier to transport and use than the parent (solid) coal. These liquids are suitable refinery feedstocks for the manufacture of gasoline, heating oil, diesel fuel, jet fuel, turbine fuel, fuel oil, and petrochemicals.

Liquefying coal involves increasing the ratio of hydrogen to carbon atoms (H:C) considerably—from about 0.8 to 1.5–2.0. This can be done in two ways: (1) indirectly, by first gasifying the coal to produce a synthesis gas (carbon monoxide and hydrogen) and then reconstructing liquid molecules by Fischer-Tropsch or methanol synthesis reactions; or (2) directly, by chemically adding hydrogen to the coal matrix under conditions of high pressure and temperature. In either case (with the exception of methanol synthesis), a wide range of products is obtained, from light hydrocarbon gases to heavy liquids. Even waxes, which are solid at room temperature, may be produced, depending on the specific conditions employed.