| 释义 |
Definition of handsaw in English: handsawnoun ˈhan(d)sɔːˈhæn(d)ˌsɔ A wood saw worked by one hand. Example sentencesExamples - If the four cuts were not enough to cut all the way through the board, finish it off with a sharp handsaw.
- Most cuts can be made with a circular saw, handsaw, or saber saw, but the angled back support would be more easily cut with a table saw.
- Finish the cutout with a sharp handsaw, jigsaw or reciprocating saw.
- This is best done with a fine-toothed handsaw, though a power jig saw can also be used.
- For straight cuts use a circular saw or a handsaw; for curves use a portable jigsaw.
- A scrap of cardboard will support your handsaw so you can undercut the bottoms of the doorway moldings to allow for the flooring to slip underneath.
- According to the Killarney councillor, a practice has emerged in recent years of using handsaws axes and even chainsaws to cut holly branches.
- Use a handsaw and miter box to cut four pieces of L-shaped edge molding to fit around the canvas.
- Using a fine-tooth handsaw or circular saw, rip the final row to fit into place, again leaving a 1/4 ‘gap against the wall.
- Clamp the stringer to sawhorses and use a circular saw to make the most of each cut, finishing with a handsaw.
- Lauan plywood is inexpensive and can be cut with a handsaw, any power saw, or even a utility knife guided by a metal straightedge.
- Mark all cut lines with a pencil; trim panels to size using a block plane for the sides and a handsaw for the ends.
- In my garage, we inserted large peg hooks to go into the wall and hung up long extension cords, a hose, a ladder, a bike, a lawn edger/trimmer, a rake, a shovel and a handsaw.
- A few hours after a tree is cut, the trunk seals itself off and water can't pass through, so before you bring your tree inside, use a small handsaw to take an additional 2 inches off the base.
- Complete the form building by slicing off the ground stakes flush with the top edge of the 2x6 form boards using a handsaw.
- Cut the excess off with a handsaw; but first, mark the cut line with some masking tape to protect against chipping.
- Remember those little slotted plastic boxes you could use to guide your handsaw when cutting miters?
- American handsaws cut on the push; Japanese handsaws cut on the pull.
- Using a handsaw or circular saw, carefully cut out the stringer along your layout lines.
- A reciprocating saw, as the name implies, utilizes interchangeable blades that move out and back in a reciprocating motion, in much the same action as using a handsaw.
Definition of handsaw in US English: handsawnounˈhan(d)ˌsôˈhæn(d)ˌsɔ A wood saw worked by one hand. Example sentencesExamples - In my garage, we inserted large peg hooks to go into the wall and hung up long extension cords, a hose, a ladder, a bike, a lawn edger/trimmer, a rake, a shovel and a handsaw.
- A reciprocating saw, as the name implies, utilizes interchangeable blades that move out and back in a reciprocating motion, in much the same action as using a handsaw.
- Mark all cut lines with a pencil; trim panels to size using a block plane for the sides and a handsaw for the ends.
- This is best done with a fine-toothed handsaw, though a power jig saw can also be used.
- If the four cuts were not enough to cut all the way through the board, finish it off with a sharp handsaw.
- Remember those little slotted plastic boxes you could use to guide your handsaw when cutting miters?
- Finish the cutout with a sharp handsaw, jigsaw or reciprocating saw.
- Most cuts can be made with a circular saw, handsaw, or saber saw, but the angled back support would be more easily cut with a table saw.
- Use a handsaw and miter box to cut four pieces of L-shaped edge molding to fit around the canvas.
- Using a fine-tooth handsaw or circular saw, rip the final row to fit into place, again leaving a 1/4 ‘gap against the wall.
- For straight cuts use a circular saw or a handsaw; for curves use a portable jigsaw.
- According to the Killarney councillor, a practice has emerged in recent years of using handsaws axes and even chainsaws to cut holly branches.
- Clamp the stringer to sawhorses and use a circular saw to make the most of each cut, finishing with a handsaw.
- Cut the excess off with a handsaw; but first, mark the cut line with some masking tape to protect against chipping.
- Complete the form building by slicing off the ground stakes flush with the top edge of the 2x6 form boards using a handsaw.
- Lauan plywood is inexpensive and can be cut with a handsaw, any power saw, or even a utility knife guided by a metal straightedge.
- A few hours after a tree is cut, the trunk seals itself off and water can't pass through, so before you bring your tree inside, use a small handsaw to take an additional 2 inches off the base.
- American handsaws cut on the push; Japanese handsaws cut on the pull.
- A scrap of cardboard will support your handsaw so you can undercut the bottoms of the doorway moldings to allow for the flooring to slip underneath.
- Using a handsaw or circular saw, carefully cut out the stringer along your layout lines.
|