| 释义 |
Definition of bob weight in English: bob weightnoun A component used as a counterweight to a moving part in a machine. Example sentencesExamples - On straight four and six cylinder engines no bobweights are required.
- After the bobweights are made to be the same correct weight, they are attached to the crank pins.
- The crank has bobweights attached to it to simulate the weight of the pistons.
- Auto guys will then make up a bobweight of nuts and bolts equal to the rotating part which they add to the crank throws and that is then spun on a dynamic balance machine.
- The bobweight we use is usually somewhat heavier than the final bobweight of the finished rotating assembly.
- These bobweights simulate the total weight from the formula used in weighing all the components.
- The pistons rose and fell together, and the one-piece crankshaft had three integral bobweights.
- A good rule of thumb is to figure a bobweight of 2400 grams for these motors as it will almost always balance out a bit less than that.
- A simple cord pendulum with adjustable bobweight is included.
- The program available here is the first part of that project, in that it helps to compute the bobweight masses.
- The correct bobweights are then assembled and mounted on the crankshaft rod journals.
- Finally, the bobweight is attached to the rod pin and the complete assembly is spun and dynamically balanced.
- Various mechanisms can be used to secure and hold the bobweights in position in the tubular member, such as welding, adhesive bonding, staking, brazing, and the like.
- This value must be the weight of an empty bobweight including all mounting and disk retaining nuts.
- The four sets of bobweights are then placed onto the crank, alternating at 90 degrees.
- Though the unit looked and moved OK when at rest, a run on the distributor test machine showed the bobweights sticking and binding on the pivots which restricted the advance very badly.
Definition of bob weight in US English: bob weightnoun A component used as a counterweight to a moving part in a machine. Example sentencesExamples - The four sets of bobweights are then placed onto the crank, alternating at 90 degrees.
- After the bobweights are made to be the same correct weight, they are attached to the crank pins.
- Though the unit looked and moved OK when at rest, a run on the distributor test machine showed the bobweights sticking and binding on the pivots which restricted the advance very badly.
- The correct bobweights are then assembled and mounted on the crankshaft rod journals.
- A good rule of thumb is to figure a bobweight of 2400 grams for these motors as it will almost always balance out a bit less than that.
- Auto guys will then make up a bobweight of nuts and bolts equal to the rotating part which they add to the crank throws and that is then spun on a dynamic balance machine.
- On straight four and six cylinder engines no bobweights are required.
- The bobweight we use is usually somewhat heavier than the final bobweight of the finished rotating assembly.
- The pistons rose and fell together, and the one-piece crankshaft had three integral bobweights.
- These bobweights simulate the total weight from the formula used in weighing all the components.
- The crank has bobweights attached to it to simulate the weight of the pistons.
- This value must be the weight of an empty bobweight including all mounting and disk retaining nuts.
- The program available here is the first part of that project, in that it helps to compute the bobweight masses.
- A simple cord pendulum with adjustable bobweight is included.
- Finally, the bobweight is attached to the rod pin and the complete assembly is spun and dynamically balanced.
- Various mechanisms can be used to secure and hold the bobweights in position in the tubular member, such as welding, adhesive bonding, staking, brazing, and the like.
|