释义 |
Definition of tunnel kiln in English: tunnel kilnnoun An industrial kiln in which ceramic items being fired are carried on trucks along a continuously heated passage. Example sentencesExamples - Some tunnel kilns reach length of some 100 metres, where by the finish product comes at the end.
- The fourth tunnel kiln has four zones of control.
- The difference between the modern and early tunnel kiln is the use of blowers for both preheating and cooling.
- The firing zone in a tunnel kilns will be fixed at a certain position within the kiln.
- After firing the hacks are picked from the tunnel kiln cars with an unloading machine which is equipped with two grippers and put on two unloading lines.
- Recommendations were prepared for improving the parameters of be aerodynamic regime for tunnel kilns.
- If the green brick were not dried, contained moisture could turn to steam in the tunnel kiln and blow the bricks apart.
- High purity sintered dolomite that is sized, blended, pressed into a brick shape, then fired in a high temperature tunnel kiln to create a strong ceramically bonded brick.
- The new tunnel kiln burns natural gas and is anticipated to be 25 percent more fuel-efficient than the one it replaces.
- The tunnel kiln is a car pushing type continuous kiln consists of preheating, firing and cooling zones.
- The minimum sintering time is an hour which is shorter than the time in the fastest conventional tunnel kiln with electric heaters.
- For economic and ecological reasons waste heat of the tunnel kiln is used for heating drying chambers.
- The traditional tunnel kilns were used commercially until the 1930's.
- Accelerating product speed at the same time has increased throughput, and so the inefficient electrical tunnel kiln can be shut down without loss of production capacity.
Definition of tunnel kiln in US English: tunnel kilnnoun An industrial kiln in which ceramic items being fired are carried on trucks along a continuously heated passage. Example sentencesExamples - The difference between the modern and early tunnel kiln is the use of blowers for both preheating and cooling.
- High purity sintered dolomite that is sized, blended, pressed into a brick shape, then fired in a high temperature tunnel kiln to create a strong ceramically bonded brick.
- After firing the hacks are picked from the tunnel kiln cars with an unloading machine which is equipped with two grippers and put on two unloading lines.
- The new tunnel kiln burns natural gas and is anticipated to be 25 percent more fuel-efficient than the one it replaces.
- Some tunnel kilns reach length of some 100 metres, where by the finish product comes at the end.
- Accelerating product speed at the same time has increased throughput, and so the inefficient electrical tunnel kiln can be shut down without loss of production capacity.
- The firing zone in a tunnel kilns will be fixed at a certain position within the kiln.
- If the green brick were not dried, contained moisture could turn to steam in the tunnel kiln and blow the bricks apart.
- The traditional tunnel kilns were used commercially until the 1930's.
- The fourth tunnel kiln has four zones of control.
- Recommendations were prepared for improving the parameters of be aerodynamic regime for tunnel kilns.
- The minimum sintering time is an hour which is shorter than the time in the fastest conventional tunnel kiln with electric heaters.
- The tunnel kiln is a car pushing type continuous kiln consists of preheating, firing and cooling zones.
- For economic and ecological reasons waste heat of the tunnel kiln is used for heating drying chambers.
|